Pro Flow is a rapid setting, high performance latex based two part smoothing compound consisting of a specially formulated powder component that is mixed with a pre-gauged, protein free and high polymer content liquid. Pro Flow has excellent flow and adhesion properties making it suitable for a wide range of both commercial and domestic applications. These unique properties ensure that Pro Flow can be used with confidence without the need to prime the large majority of substrates.

Pro Flow is suitable for use over a wide range of substrates including sand/cement screeds, concrete, flooring grade asphalt/bitumen, moisture tolerant old adhesive residues, epoxy damp proof membranes and plywood. Pro Flow is also ideal for encapsulating electric underfloor heating elements and for use over underfloor heated screeds. 

Once mixed, Pro Flow will remain workable for 20 – 25 minutes and it will accept light foot traffic after 90 minutes in ideal conditions. Decorative floor coverings can be installed after 4 hours and ceramic tiles can be applied after 3 hours. Pro Flow can be applied from depths of 2 – 12mm in one application. When mixed with additional aggregate, Pro Flow can be applied up to 30mm thick. Pro Flow is moisture tolerant and it can be used to smooth subfloors prior to the installation of a DPM.

 

ADVANTAGES:

Install decorative floor coverings after 4 hours and ceramic tiles after 3 hours

Suitable for use over old adhesive residues including bitumen

Moisture tolerant - can be used below a DPM

Excellent flow properties

Excellent adhesion properties without priming most substrates

Ideal for use above underfloor heating systems

Ideal for timber substrates

Low odour

Protein free

IDEAL FOR:

Sand/Cement Screed

Concrete

Plywood Overlay (6mm min)

Electric Underfloor Heating

Water/Wet System Underfloor Heating

Tile Backer Boards

Existing Ceramic, Porcelain and Natural Stone Tiles

Flooring Grade Asphalt & Bitumen

Anhydrite Screeds

Fibre Cement Sheet

Existing Vinyl Tiles

Steel/Metal Surfaces

Epoxy DPM

Existing Adhesive Residues

Green Screed

Fibreglass